Rainbow Bar

10/100Base-T Ethernet Fiber Media Converter

Rainbow Bar
 
(Model TC3210)
  • 10/100Base-T Auto-Negotiating
  • Distances up to 100km
  • 2-Way "One Fiber" Communication Optional
  • Multimode & Single Mode (1300/1550nm)
  • Hardened Temperature (-40C to 80C) Optional, Exceeds NEMA & Caltrans Traffic Control Specs
  • Five Diagnostic LED Indicators
  • Built-In Power Redundancy
  • Local Dry Contact Alarm Relay
  • Rackmount or Stand Alone

 

 

 

Data Sheets: 2 pages (417 Kb)
TC3210S Standalone/Wallmount


TC3210S Standalone/Wallmount (Single Optic)

(Click on images to enlarge)
 


Applications

The TC3210R/S is typically used to interconnect 10/100Mbps switching hubs, workstations or any other Fast Ethernet compliant device at distances up to 100km.

Top


Description                                        

Featuring connectivity distances up to 100km, the TC3210R/S Media Converter converts or connects 10/100Mbps Ethernet Unshielded Twisted Pair (10/100Base-T) to single mode or multimode fiber optics (10/100Base-FX). It is commonly used to interconnect network bridges, hubs, or workstation cards. The TC3210S is the standalone/wallmount unit. The TC3210R rackmount version fits into TCRM192 or TCRM196 19" rackmount card cages. 

Completely transparent to the network, the TC3210R/S is ideal for integrating UTP and fiber optics in any Fast Ethernet network. Designed with modern Field Programmable Gate Array (FPGA) technology, it operates efficiently even during high-demand traffic loads. 

Dry contact alarms are provided for connection to remote network management systems. A local fiber loopback feature, eight LED indicators, and an Uplink/Downlink slide switch are provided on the front panel to assist in installation & troubleshooting.

The TC3210R/S is available both multimode (1300nm) and single mode (1300nm & 1550nm). Fiber optic connectors are ST or FC. The UTP connector is RJ-45 female. Power is 12VDC @ 600mA (standard); optional power sources include 24VDC, -48VDC, 125VDC, or 115/230VAC with an external power cube. An extreme temperature version (-20 to 70C, -40 to 80C), Model TC3210X, is also available.

A terminal block connector on the rear panel provides for the dry contact relay alarm. Normally in the OPEN position, any loss of electrical or optical signal will trigger an alarm condition and force the switch to the CLOSED position. This relay can be used in conjunction with an external device to monitor the condition of the link.

Top


Technical Specifications    

Data Rate
10/100 Mbps (Auto-Sensing)
Optical
Interface 100Base-FX
Transmitter ELED, LASER*
Receiver PIN Diode
Wavelength 1300nm Multimode
1300nm, 1550nm Single Mode
Fiber Optic Connectors ST,FC or SC
Loss Budget*
(1300nm, 1550nm)
Multimode (62.5/125m): 15dB
Single Mode (9/125m): 20dB
Electrical
Interface 10/100Base-T Ethernet
Connector (UTP) RJ45 Female
System
Bit Error Rate 1 in 109 or better

* Contact factory for higher requirements

ALARM
Dry Contact Normal OPEN
Visual Indicators
Power Status PWRA, PWRB, Vcc
UTP Signal Status Auto Neg. Detect, TP, 10M, 100M
Optic Signal Status FO, 10M, 100M
Power
Standard 12VDC @ 600 mA
Optional 24VDC, -48VDC, 125VDC, 115/230VAC (with external power cube)
Temperature
Operating 0 to 50C
Hi-Temp (optional) -20 to 70C
Extreme Temp (optional) -40 to 80C
Storage -40 to 90C
Humidity 95% non-condensing
Physical (Wallmount Base Unit)
Height (3.53 cm) 1.4"
Width (18.14 cm) 7.1"
Depth (16.57 cm) 6.5"
Weight (501 gm) 1.1 lbs.
ORDERING INFORMATION
T C 3 2 1 0 x1 - x2 x3 1 - x4
Part No. - 10/100Base-T Ethernet Fiber Media Converter

x1position Package types S = Stand Alone
R =Rack Mount
x2 positionTx/Rx Type 03 = 1310nm MM Dual Fiber LED 15db
L1 = 1310nm SM Dual Fiber Laser 20db
L2 = 1310nm SM Dual Fiber Laser 25db
L5 = 1550nm SM Dual Fiber Laser 30db
M5 = 1310nm SM Single Fiber Laser 40km
M6 = 1310nm SM Single Fiber Laser 60km
M7 = 1550nm SM Single Fiber Laser 40km
M8 = 1550nm SM Single Fiber Laser 60km
x3 positionConnector type ST = ST
FC = FC
SC* = SC * Single fiber units available only with SC
x4 positionPower 12 = 12Vdc
24 = 24Vdc
48 = -48Vdc
25 = 125Vdc
Power Supplies
  TC3PS-TB-08-01 North American Type
  TC3PS-TB-08-03 German Type
  TC3PS-TB-08-04 U.K Type

Example
Part Number
T C 3 2 1 0 S - 0 3 S T 1 - 1 2

Description
MM Stand alone TC3210 1310nm LED
single fiber 12Vdc with ST connectors

For more information, contact:
Metrotek
Phone: (727) 547-8307
Fax: (727) 547-0687

E-mail: fiberoptics@metrotek.com

BACK: To Metroteks Links Page
BACK: To Metrotek's Home Page